|
Products
- Laser and Amplifier for LiDAR
- Single Frequency Fiber Laser
- Pulsed Fiber Laser
- CW Fiber Laser
- Pulsed Fiber Amplifier
- CW Fiber Amplifier
- QCW Fiber Laser
- Laser Source
- Fiber Bragg Grating (FBG)
- Component and Subassembly
Search
Home > Products > CW Fiber Amplifier > 1.5um Fiber Amplifie... > C-Band PreAmp EDFA
C-Band PreAmp EDFA
Product Description:
The MARS series C-band PreAmp Er-doped fiber amplifiers of Connet are the high-gain, low-noise fiber amplifiers (Pre-EDFA). This amplifier is used to pre-amplify the small signal, improve the receiver sensitivity and extend the transmission distance of the signal. This series of amplifiers employ the optimized Er-doped fiber optical path structure internally. The ASE is suppressed to an extreme level and the high-performance small signal amplification output can be achieved. The maximum gain can be up to 50dB at the small signal input of -40dBm.
Connet MARS series C-band Pre-Amp Er-doped fiber amplifiers (Pre-EDFA) have the built-in drive circuit and the logical control circuit to perform real-time monitor on the input/output optical power, the temperature of the pump laser and the module, and the signal gain. All the state parameters and the configuration information can be flexibly adjusted and monitored via the main control software on the upper computer. Both the benchtop and the module packages are available for option to meet the requirements of different applications.
Features:
● Low noise, high gain
● High stability, high reliability
● Gain flattened
● Tunable output power
Applications:
● Metro network
● Optical access network
● Fiber optic communication
● Scientific research
Specifications：
|
Parameter |
Unit |
Specification |
||
|
Min |
Typ. |
Max |
||
|
Part no. |
|
MFAS-ER-C-PA |
||
|
Operating wavelength |
nm |
1528 |
1550 |
1560 |
|
Input power |
dBm |
-45 |
- |
-10 |
|
Output power |
dBm |
- |
10 |
- |
|
Minimum gain |
dB |
30 |
- |
- |
|
Noise figure |
dB |
- |
- |
5 |
|
Input/output isolation |
dB |
30 |
35 |
- |
|
Output power tunable range |
% |
0 |
- |
100 |
|
Output power tunable mode |
|
Coarse/Fine |
||
|
Power consumption |
W |
- |
- |
5 |
|
Operating temperature |
℃ |
0 |
- |
+50 |
|
Storage temperature |
℃ |
-40 |
- |
+85 |
|
Input/output fiber type |
|
SMF 9/125um NA=0.13 |
||
|
Input/output fiber length |
m |
> 1 |
||
|
Optical connector |
|
FC/APC (other options available) |
||
|
Power supply |
VAC |
100-240 |
||
|
Dimension |
|
19”2U |
||
Spectrum:
Ordering Information：
MFAS-Er-C-<P>-<PW>-PA
P: Package, B-Benchtop, M-Module
PW：Output power in dBm, Example: 7-5mW, 10-10mW
download
Related Products
C-Band Low Noise PreAmp EDFA Module
L-Band Optical Fiber Amplifier
L-band High Power Optical Fiber Amplifier
