|
Products
- Laser and Amplifier for LiDAR
- Single Frequency Fiber Laser
- Pulsed Fiber Laser
- CW Fiber Laser
- Pulsed Fiber Amplifier
- CW Fiber Amplifier
- QCW Fiber Laser
- Laser Source
- Fiber Bragg Grating (FBG)
- Component and Subassembly
Search
Home > Products > Laser Source > ASE Broadband Light ... > 1.0um ASE Broadband ...
1.0um ASE Broadband Light Source
Product Description:
The VENUS series 1.0um high-stability ASE light sources of Connet use an optimized Yb-doped fiber all-fiber configuration, and cooperates with a carrier-grade 980nm single-mode pump laser to achieve high-performance output. The control system based on advanced microprocessors, combined with high-precision ATC and ACC (APC) control circuits, achieves a high and stable output of the laser, while ensuring fast and intuitive control of the light source.
Connet VENUS series high stability ASE light source has a highly stable output, and the long-term output power stability is even better than 1%. Connet unique high stability control circuit and thermal control design ensures the stable output is guaranteed.
The VENUS series benchtop 1.0um high-stability ASE light sources of Connet are highly integrated system with high-definition LCD which displays the key parameters such as output power, pump laser status etc. It's suitable for scientific research and manufacturing testing. In addition, Connet can also provide compact module package for system integration.
Features:
● Single-mode output
● Wide spectrum: > 45nm
● High output power
● Low RIN
Applications:
● Test and
measurement
● Optical fiber
sensor system
● Optical coherence
tomography
● Spectrum analysis
● Other lab applications
Specifications：
|
Parameter |
Unit |
Specification |
||
|
Min |
Typ. |
Max |
||
|
Part no. |
|
VASS-Yb-B：SM VASP-Yb-B：PM |
||
|
Output power1 |
mW |
10 |
- |
100 |
|
Operating wavelength |
nm |
1035 |
- |
1080 |
|
Spectral width (FWHM） |
nm |
- |
45 |
- |
|
Spectral flatness(Standard) |
dB |
- |
4 |
6 |
|
Spectral flatness(Gain Flatted) |
dB |
- |
2 |
3 |
|
Output isolation |
dB |
30 |
35 |
- |
|
Stability of output power(8h)2 |
% |
- |
±1.0 |
±2.0 |
|
Output Power Adjustment Mode |
|
Coarse / Fine |
||
|
Output fiber type (SM) |
|
SMF 6/125um NA=0.13 |
||
|
Output fiber type (PM) |
|
Panda 980 NA=0.13 |
||
|
Polarization extinction ratio(PER) |
dB |
> 20(PM output fiber) |
||
|
Length of output fiber |
m |
> 1 |
||
|
Output fiber connector |
|
FC/APC(other options available) |
||
|
Operating voltage |
VAC |
100-240 |
||
|
Power consumption3 |
W |
- |
- |
20 |
|
Operating temperature |
℃ |
0 |
- |
+50 |
|
Storage temperature |
℃ |
-40 |
- |
+85 |
|
Dimension |
mm |
270(L)×235(W)×105(H) |
||
• Output power is optional , typical output power: 10mW, 20mW, 50mW,100mW
• The output power stability is measured under 25℃, 30 minutes after warm-up.
• The max power consumption refers to the consumption under extreme temperature conditions.
Spectrum：
Ordering Information：
• VASS-Yb-P-<PW>-<FL>
• VASP-Yb-P-<PW>-<FL>
• VASS: SM fiber output; VASP: PMF output.
• P: Package, B-benchtop, M-module
• PW: Output power in mW.Example:30-30mW,50-50mW
• FL: Spectral flatness: 0-Standard, 1- Gain Flatted
download
Related Products
C+L-Band ASE Broadband Light Source
C-Band ASE Broadband Light Source
L-Band High Stability ASE Light Source
