|
Products
- Laser and Amplifier for LiDAR
- Single Frequency Fiber Laser
- Pulsed Fiber Laser
- CW Fiber Laser
- Pulsed Fiber Amplifier
- CW Fiber Amplifier
- QCW Fiber Laser
- Laser Source
- Fiber Bragg Grating (FBG)
- Component and Subassembly
Search
Home > Products > CW Fiber Amplifier > 1.5um Fiber Amplifie... > 1.5um CW Single Freq...
1.5um CW Single Frequency Polarization Maintaining Fiber Amplifier Module
Product Description:
Connet 1550nm CW single frequency polarization maintaining fiber amplifiers are suitable for amplifying the single frequency narrow-linewidth light source. The linewidth can be narrow to kHz level. Through the multi-stage optical amplification in the optimized design, this series of amplifiers can suppress the nonlinear effects, such as the stimulated Brillouin scattering (SBS), realize the high power output, maintain the spectral characteristics of the signal light and obtain the near diffraction-limited beam quality at the same time, which are the ideal amplifiers for coherent communication and Doppler Lidar system.
Applications:
● Space laser communication
● Interferometric sensors
● Coherent Lidar
● Cold Atomic Physics
● Scientific research
Features:
● Eye safety output wavelength: 1550nm
● Output power up to 10W
● Suitable for kHz-level signal amplification
● No SBS
● Near diffraction-limit beam quality M2 <1.5
Specifications:
|
Parameter |
Unit |
Specification |
||
|
Min |
Typ. |
Max |
||
|
Part no. |
|
MFAP-1550-M-SF |
||
|
Center wavelength |
nm |
1540 |
1545/1550 |
1565 |
|
Output power |
W |
- |
- |
10 |
|
Input power |
mW |
0 |
- |
200 |
|
Input linewidth |
kHz |
0.01 |
- |
- |
|
Output beam quality |
M2 |
- |
1.05 |
1.5 |
|
Polarization Extinction Ratio (PER) |
dB |
17 |
20 |
- |
|
Output power stability |
% |
- |
- |
±1 |
|
Optical isolation |
dB |
35 |
- |
- |
|
Power supply |
VDC |
12-24 |
||
|
Control mode |
|
ACC/APC |
||
|
Communication control interface |
|
RS232 |
||
|
Control software |
|
Yes |
||
|
Built-in circulator |
|
Optional |
||
|
Operating temperature |
℃ |
-35 |
- |
+65 |
|
Storage temperature |
℃ |
-40 |
- |
+85 |
|
Input/output fiber type |
|
SM, PM or PLMA fiber |
||
|
Input/output fiber length |
m |
>0.3 |
||
|
Optical connector |
|
FC/APC or Collimator (other optional) |
||
|
Dimension |
mm |
200x135x41 |
||
· Please specify the input power.
· High power optical circulator can be integrated on request.
Ordering Information:
· MFAP-1550-M-SF-<P>-FA (-COL)
· P: Output power, 5-5W, 10-10W
· FA: FC/APC connector, COL: Collimator
download
Related Products
