- Laser and Amplifier for LiDAR
- Single Frequency Fiber Laser
- Pulsed Fiber Laser
- CW Fiber Laser
- Pulsed Fiber Amplifier
- CW Fiber Amplifier
- Laser Source
1.5um High Power Single Frequency Fiber Laser
The 1.5um high power single-frequency fiber lasers are featured by low noise and narrow linewidth. They are based on the self-developed single frequency laser basic module of Connet Laser. The high power output is achieved by multi-stage amplification and the maximum power can be up to 10W.
The 1550nm high power single frequency fiber laser of Connet Laser employs the optimized optical path to realize the high power output and suppress the nonlinear effects in the fiber effectively and meanwhile, obtain the near diffraction-limited beam quality.
The 1.5um high power single frequency fiber laseris normally with 10W output power and the other output power can be customized. The center wavelength can be chosen freely in the range of 1535-1575nm, such as the standard wavelengths of ITU.
• Ultra-narrow linewidth
• Stable single frequency & single polarization operation
• No mode-hopping, No out-bursting noise
phase and intensity noise
• Flexible design, various wavelengths optional
• PM output, high PER
• Fiber Optic Sensor
• Laser spectroscopy
• Wavelength references
• Research & development
1530-1561nm (can be customized)
Output Laser Type
CW, Single frequency & Single polarization
Side Mode Suppression Ratio (SMSR)
Output Polarization Type
Polarization Extinction Ratio (PER)
Output Power Stability (15min)
Output Power Stability (8hours)
Output Light Isolation
Output Power Tunable Range
Output Fiber Type
Output Fiber Length
1. The center wavelength is selectable within the specified range. Other wavelengths are available.
2. Output power is optional.
3. Lorentzian line shape with optical delay of 120us.
15xx: Wavelength in nm, standard wavelength: 1550nm
PW: Output power in W, Example: 0.5-0.5W, 10-10W
Notes:The output power may be different in various wavelengths. Please contact us for more information.