|
Products
- Laser and Amplifier for LiDAR
- Single Frequency Fiber Laser
- Pulsed Fiber Laser
- CW Fiber Laser
- Pulsed Fiber Amplifier
- CW Fiber Amplifier
- QCW Fiber Laser
- Laser Source
- Fiber Bragg Grating (FBG)
- Component and Subassembly
Search
Home > Products > Laser and Amplifier ... > Lasers and Amplifier... > CoLIA 1550nm Long P...
CoLIA 1550nm Long Pulse Single Frequency PM Fiber Amplifier
Product Description:
The CoLIA 1550nm long pulse single frequency polarization maintaining fiber amplifiers of Connet are designed for long pulse (100ns-2us) application. This modularized fiber amplifier is an eye-safe wavelength amplifier and the max pulse energy can be up to 120uJ.
Connet CoLIA 1550nm long pulse single frequency polarization maintaining fiber amplifiers are suitable for amplifying the single frequency narrow-linewidth source. The linewidth can be narrow to kHz level. Through the multi-stage optical amplification in the optimized design, this series of low noise fiber amplifiers can suppress the nonlinear effects, such as the stimulated Brillouin scattering (SBS), realize the high pulse energy, maintain the spectral characteristics of the signal light and obtain the near diffraction-limited beam quality at the same time, which are the ideal amplifiers for Doppler wind-measurement LiDAR system.
Applications:
● Doppler wind-measurement LiDAR
● Aerosol detection
● Pollution monitoring
● Other scientific research
Features:
● Eye-safe wavelength: 1550nm
● Pulse energy: up to 120uJ
● Repetition rate adjustable: 10-20KHz
● Pulse width: 200-2000ns
Specifications:
|
Parameter |
Unit |
Specification |
||
|
Min |
Typ. |
Max |
||
|
Part no. |
|
CoLIA-1550-M-SF-LP |
||
|
Center wavelength |
nm |
1530 |
1550 |
1561 |
|
Peak power @200ns pulse width |
W |
- |
- |
600 |
|
Pulse energy @200ns pulse width |
uJ |
- |
- |
120 |
|
Pulse width |
ns |
200 |
- |
2000 |
|
Repetition rate |
kHz |
10 |
- |
20 |
|
Input average power |
uW |
20 |
- |
- |
|
Beam quality1 |
M2 |
1.05 |
1.2 |
1.3 |
|
Polarization Extinction Ratio (PER)2 |
dB |
17 |
- |
- |
|
Output power stability (15mins) |
% |
- |
±0.5 |
- |
|
Output power stability3 (8hrs) |
% |
- |
±1 |
±1.5 |
|
Output isolation |
dB |
30 |
- |
- |
|
Power supply |
VDC |
12-24 |
||
|
Operating temperature |
℃ |
-35 |
- |
+50 |
|
Storage temperature |
℃ |
-40 |
- |
+85 |
|
Output fiber type |
|
PLMA fiber |
||
|
Output fiber length |
m |
>0.3 |
||
|
Optical connector |
|
FC/APC (other options available) |
||
|
Communication interface |
|
RS232 |
||
|
Cooling mode |
|
Air-cooling |
||
|
Dimension |
mm |
200(L)x135(W)x41(H) |
||
· The beam quality is related to the output power;
· The PER is related to the output power;
· The output power stability is measured under 25℃ after 30 minutes' warm-up.
Ordering Information:
· CoLIA-1550-M-SF-LP-XX-YY-ZZ
· XX: Pulse width in ns
· YY: Repetition rate in kHz
· XX: Peak power in W
· Example: CoLIA-1550-M-SF-LP-200-10-100
Pulse width: 200ns
Repetition rate: 10KHz
Peak power: 100W
download
Related Products
1550nm Long Pulse Single Frequency PM Fiber Laser (MP)
1550nm Long Pulse Single Frequency PM Fiber Laser (HP)
1.5um Low Power CW Single Frequency Polarization Maintaining Fiber Amplifier
