- Laser and Amplifier for LiDAR
- Single Frequency Fiber Laser
- Pulsed Fiber Laser
- CW Fiber Laser
- Pulsed Fiber Amplifier
- CW Fiber Amplifier
- Laser Source
- Component and Subassembly
1.0um High Power Pulsed Fiber Amplifier
The MARS series 1.0um high power pulsed fiber amplifiers of Connet Laser are specially designed for short pulse (<10ns) amplification. These amplifiers employ the optimized double cladding fiber amplification technology. Therefore, they can guarantee the maximum optical-optical conversion efficiency and the minimum nonlinear effects to avoid the spectral broadening of the pulse signal during the process of amplifying. The output peak power is up to 50kW.
The unique thermal treatment technology guarantees that the amplifiers can be operated stably for a long time. The high-speed response protection circuit monitors the power of input and output signal automatically to ensure the safety of the whole system.
The MARS series high-power pulsed fiber amplifiers include the single-mode and the polarization output. Different kinds of package types are adopted such as bentchtop, rack and module. These amplifiers can be widely used in the areas of optical fiber sensing, coherent combination and laser processing.
• High Peak output：up to 50kW
• High Stability, High Reliability
• Output Power Tunable
• Customized Product Available
• LiDAR & LaDAR
• Biological and Medical
• Laser Processing
• Research & Development
|Part No.||MFAS-Yb-10xx-PL：SM MFAP-Yb-10xx-PL：PM|
|Average Output Power||W||-||-||5|
|Peak Output Power||kW||-||-||50|
|Output Power Tunable Range||%||10||-||100|
|Output Polarization||Random or Linear polarization|
|Polarization Extinction Ratio (PER)||dB||15||20||-|
|Output Power Stability2 (8hours)||%||-||±1||±2|
|Input Light Isolation||dB||30||-||-|
|Output Light Isolation||dB||30||-||-|
|Output Fiber Length||m||>1|
|Optical Connectors||FC/APC (other options available)|
||19” 2U or 19” 3U|
1. Typical operating wavelengths are 1053nm, 1064nm and 1083nm.
2. The output power stability is measured under 25℃, after 30 minutes' warm-up.
10xx: Operating wavelength in nm, typical wavelength: 1053nm, 1064nm, 1083nm