- Laser and Amplifier for LiDAR
- Single Frequency Fiber Laser
- Pulsed Fiber Laser
- CW Fiber Laser
- Pulsed Fiber Amplifier
- CW Fiber Amplifier
- Laser Source
CoLID Series 1064nm Short Pulse Fiber Laser for LiDAR
The CoLID series 1064nm pulsed fiber laser of Connet Laser is a laser source delivering high peak power and high pulse energy. Using MOPA configuration and all- fiber optimized design, the laser can offer the high peak power and the near diffraction-limited quality output beam.
The CoLID series 1064nm pulsed fiber laser of Connet Laser employs the module package with compact and rugged design, integrated with external trigger and synchronization output monitor. It is easily deployed and maintenance-free, ensuring a long-life and cost-effective operation. The user also can adjust pulse width and repetition rate of the laser by connecting computer. It is quite suitable for system integration.
• High peak power: up to 4kW
• Average power: up to 2W
• Repetition rate adjustable: 30-500 kHz
• Pulse energy: up to 10uJ
• Excellent beam quality
• 3D scanning
• Range finding
• Target detection
|Output Power Stability (15 min)||%||-||-||±1.5|
|Output Power Stability1 (8h)||%||-||±2||±1.3|
|Operating Temperature (standard)||°C||0||-||50|
|Operating Temperature (optional)||°C||-35||-||65|
|Operating Voltage||VDC||5.5 to 12|
|Trigger Mode||TTL External trigger|
|Output Fiber Length||m||> 0.3|
|Output Fiber Connector||/||FC/APC or Collimator|
|Dimensions||mm||90x23.5 (D x H)|
1. The output power stability is measured under 25℃, after 30 minutes’ warm-up.
2. Power consumption is related to output power and operating conditions.
XX: Pulse width in ns
YY: Repetition rate in kHz
ZZ: Peak power in kW
1064nm Short Nanosecond Pulse Fiber Laser module, 2ns pulse width, 200kHz repetition rate, with 4kW peak power and 10uJ single pulse energy, FC/APC connector.
CoLID Series 1550nm Short Pulse Fiber Laser for LiDAR
1550nm Short Pulse Fiber Laser for LiDAR
1064nm Short Pulse Fiber Laser for LiDAR