|
Products
Search
Home > Products > Fiber Amplifier > 1.0um Fiber Amplifie... > 1.0um High Power Sin...
1.0um High Power Single Frequency Polarization Maintaining Fiber Amplifier
Product Description:
The MARS series high power single frequency polarization maintaining fiber amplifiers of Connet Laser are designed specifically for the ultra-narrow linewidth single frequency laser source, such as the fiber lasers based on the principle of DFB or DBR. This kind of amplifiers has the capability of boosting the low power optical signal at kHz magnitude up to 50W output power and preserves the spectral property of the input signal. The MARS series amplifiers use high power high performance multi-mode pump internally, employ the technology of double cladding fiber amplification, and have the integrated design of all polarization-maintaining structure. The output power can be continuously tuning. MARS series fiber amplifiers are integral Turn-Key system with the microprocessor inside for controlling. The front panel is equipped with the switch to start the laser, the LCD to display the state of the power and the knob to adjust the output power.
Thanks to the extensive experience of handling the double cladding fiber, Connet Laser conducts proper optimal design to the high power polarization maintaining fiber amplifiers, thus achieving high efficiency output while suppressing the nonlinear effects of the fiber. The unique thermal treatment technology guarantees that the desktop fiber amplifier can operate stably for a long time. The high-speed response protection circuit monitor the power of input and output signal automatically so that it can cut down the operation of the high power pump in case of the falling off of the input signal, thus ensures the safety of the whole system.
The MARS series high power desktop polarization-maintaining fiber amplifiers of Connet Laser can be widely used in scientific research, coherent beam combining, coherent detection sensing system, etc.
Features:
• High peak output power: 0.5W~50W
• Low noise figure
• Turn-Key system
• Total PM fiber structure, high PER
• High stability, high reliability
Applications:
• Coherent detection
• Coherent
combining
• Atomic
trapping
• Fiber sensing
• Frequency doubler
Specifications：
| Parameter | Unit | Specification | |||
| Part NO. | MFAP-Yb-1-SF | MFAP-Yb-5-SF | MFAP-Yb-10-SF | MFAP-Yb-20-SF | |
| Operating wavelength1 | nm | 1040-1090 | |||
| Input power | mW | >1 | |||
| Output power2 | W | 1 | 5 | 10 | 20 |
| Input Isolation | dB | 30 | |||
| Output Isolation | dB | 30 | |||
| Output power tunable range | % | 10-100 | |||
| Polarization Extinction Ratio(PER) | dB | 17 | 15 | ||
| Output power stability3(8h) | % | ±2 | |||
| Beam quality | M2 | <1.2 | |||
| Input fiber type | PM980 | ||||
| Output fiber type | PM980 | PLMA fiber | |||
| Length of the output fiber | m | >1 | |||
| Optical connectors | FC/APC((other options available) | ||||
| Power supply | VAC | 100~240 | |||
| Power consumption | W | 150 | |||
| Operation temperature | ℃ | 0~+35 | |||
| Storage temperature | ℃ | -40~+85 | |||
| Cooling mode | Air-Cooled | ||||
| Dimensions | mm | 19” 2U | 19” 3U | ||
1.Typical operating wavelength: 1053nm、1064nm、1083nm;
2.Typical Output power: 1W、5W、10W、20W;
3.The output power stability is measured under 25℃, 30 minutes after warm-up.
Spectrum：
Ordering Information：
MFAP-Yb-10xx-B-PW-SF：PM
10xx:Operating wavelength in nm, example:1053nm、1064nm、1083nm
B:B-Benchtop
PW:Output power in W, example:0.5-0.5W、1-1W、10-10W
SF:Single Frequency
download
Related Products
